i own a socket 478 cpu p4 2.8 ghz recommend a flawless agp8x motherboard supporting it?

i don't want to amendment my processor right now thats why i own to get an agp motherboard for gaming .if near is a pci express motherboard for 478 cpu socket please let me know

i own a socket 478 cpu p4 2.8 ghz recommend a flawless agp8x motherboard supporting it?

There not a together lots of Socket 478 motherboard that support PCI-Express. However, I was competent to find a special motherboard that have PCI-express capability that support Socket 478 processor. See the link below.

i hold a smart card reader next to contact smart card .How shud i configure it to be detected by window XP.?

I hold a set of contact smart card reader and secure smart card which be used for windows 2000.wen i tried for porthole xp,it is not detecting the reader.can u suggest wat all change do i need to brand name to interface with skylight xp.any reference to msgina.dll? Pl dont suggest to buy a fresh set of smart card reader coz it is my project to make ithe matured one work in skylight xp.

i hold a smart card reader next to contact smart card .How shud i configure it to be detected by window XP.?

RTFM :-)

make sure you own windows xp beside service pack 2 installed......

****Do Not connect the reader before you do the following******



Before connecting the reader, you must install the smartcard driver and the reader utilities for Winxp



Go to Control Panel

Open Administrative Tools

Open Services

Open Smart Card Services

Then set it to Start Automatically



afterwards plug in your smart card reader.....

For a serial port smart card reader you enjoy to restart the system....
I am not sure what do you mean by a "contact" card reader. But roughly if you have a card reader that is to say not being accepted by Windows XP first I would try go to the website of the factory owner of that card reader. Look for Support, and see if they have the driver for Windows XP here, download it, install it, reboot, and see if it works for you.



Sounds to me like adjectives you need is the right driver(s) for Windows XP and it should work fine.



And no, I enjoy no idea what is msgina.dll if you're getting a message that pops up adage something about that folder, maybe that's what it is, something wrong near the driver for your card reader. - Go download the latest driver(s) for Windows XP at the manufacturer's website.



I hope this help.

I hold a SigmaTel C-Major Audio nouns card, how do I nouns it contained by dos prompt?

I requirement to load it to attain sound contained by a program through dos prompt. I am running windows xp.

I hold a SigmaTel C-Major Audio nouns card, how do I nouns it contained by dos prompt?

The quiz is that of having the relevant drivers loaded at DOS startup. If you are thinking of booting from a DOS boot disk consequently the reference 1 will come within handy.What you need to do is probly download the relevant drivers, put them contained by a convenient location(say a:\sound) and add a column DEVICE=a:\sound\sigmatel.sys

You might need to turn out around a bit for the right drivers. Usually generic sound blaster drivers work



If you are gonna use the command prompt contained by windows, afterwards its a no brainer.find the device from my computer, find its IRQ and use the SET balster command to specify the env settings
Read the manual. Most problems can be solved by reading the guide. It should tell how to do so.

I hold a Seagate External Hard Disc. Do I own to switch it past its sell-by date when I'm not using my PC.?

Is it ok to exit it running everyday?

I hold a Seagate External Hard Disc. Do I own to switch it past its sell-by date when I'm not using my PC.?

Hi, I have one too! The thing's whiz around at 7200 Rpm. I suppose it has some caring of bearings, so though you don't HAVE to, it will prolong the duration of your disc to turn it off. The newer models hold shock resist, but until recently, they be very shock sensitive, so if the cleaning female, or your baby brother or even you bonk the entity while it's spinning around at 7200 rpm it can damage it. You lose data- your disc messes up. Smarter to turn it rotten!
ew
You can leave it running, it singular uses a little liquid when not used for a while. It's not going to overheat or anything. Just don't drop it. Mine broke ending summer.



John

A+ Certified
No you dont and yes you can.
yes u can safely switch it sour when ur not using it coz it saves dash and increases its life.



Hope that help

Hasnain Mir Mohammed
i wouldnt. just unplug the power.
You can move off it running, but it will last longer if you switch it past its sell-by date.
You can leave it running unless you are not going to use it for a few days. Most external intricate drives are built so you can leave them running. The own a special seal that allows you to walk off it running with out doing any spoil. They also go into thier own standby mode.
You dont enjoy to but it'll shorten its life if you dont.
It spins down when it's not human being used. They're used as backup drives and would probably run for 20 years before they wore out.
good idea to buy a rental car

I own a SATA to USB external HDD, it wasn't agreed lately but presently it is okay.?

There is one folder on it that looks approaching there is zilch in anymore but I'm sure at hand was formerly the malfunction. Is at hand a way to retrieve the info? All the rest is okay except this folder. It say 0 byte used but in my total for the disk I see at hand is some space still allocated for that folder (since it was resembling 10G big)



Thanks

I own a SATA to USB external HDD, it wasn't agreed lately but presently it is okay.?

the hardrive itself could have malfuntiond but if you remember the report names do a computer serch and they should pop up. the first time it wont work. but consequently it should give you an choice to serch hiden files and then it should work.

I own a Radeon x300 clear card surrounded by my computer. What is a better one to grasp so the graphics will be better?

Its a Dell computer. The graphics arent that great on it. I want a better one.

I own a Radeon x300 clear card surrounded by my computer. What is a better one to grasp so the graphics will be better?

Well, theres two types of vga card brands out there Nvidia and ATI, i myself would reccomend Nvidia due to smaller number compatability issues, but before you prefer on a card check to see whats compatible. obviously a geforce8800gtx wouldnt be compatible if you dont hold pci express and it may not run well if you dont own the right Mobo, Memory, or a high ample processor speed. post your hardware specs and ill see if i can abet ya witch compatability



**hope i helped, a site i other find useful is "www.tomshardware.com" (check out the forums, theres abundantly of techy ppl on there inclined to help ; )
Almost any one. Check the table. The X300 doesn't appear because it perform so poorly.



Make sure your motherboard supports PCI Express.
if you have a PCIE nouns on your system, get the nVidia GeForce 8800GTX. You'll be screaming hasty & the best graphics EVER.... for now to be precise.





------------------------------...

Come check out Mindset Entertainment & my artists @ http://www.mindsetentertainmentinc.net... , Click on the MUSIC association to view an assortment of artist streaming plays - Many of the songs are free to download!
DO NOT get an nvidia or geforce card becuase they are overpriced and hold many problems.Get a ati radeon 9800 xt pro.They are enormously reliable and give great graphics and celebration.
terminate a rental lease

I enjoy a Radeon 9600 Video Card that I only installed. Please support!?

Sometimes after using the computer for a while, the eyeshade will go totally white approaching its bleeped out. Do I need a strange driver update? What is the best way to configure or anything I need to do so it is not unstable? Thanks.

I enjoy a Radeon 9600 Video Card that I only installed. Please support!?

Hi. Download the most modern drivers from ATI. Make sure your board is seated properly. Check for proper ventilation so the GPU does not overheat. Make sure your power supply can provide satisfactory power. (This is a common problem beside cheap PSUs.) Also just double check the cable from the card to the monitor.